Skip to page content
Ground Zero Electrostatics Logo
Leader in Static Safe Solutions for High Tech Industries
Explore our ESD Flooring and Static Control Products for your ESD needs:
Call 877-463-9376 for a FREE Consultation!
ESD Grounding   bar
Mechanisms - ESD ground cords, chair grounders, bonding clamps, harware
ESD/Static Control Ground Cords [Home]
ESD and Static Control Ground Cords- Ground Block
4 Point Multi Point Ground Block

4 Point Multi Point Ground Block

FEATURES:

  • Designed for use at workstations
  • Provides a common grounding point for one to four wrist straps, as well as table mats and runners
  • Mounts two #10 screws allowing unit to be securely installed to workbench
  • Four banana jacks provide four grounding points
  • Available without one meg ohm resistor
  • 15 ft. cord terminated with a banana jack.
ITEM DESCRIPTION
CPG-1046 4 Point Multi Point Ground Block

Technical Documents:
» Ground Cords Data Sheet
» Adapters for Snaps Data Sheet
Two-Point Bench Grounding Block

Two-Point Bench Grounding Block

The CPG-1051 is a space-saving grounding block designed to provide direct path to ground in ESD Benches & Workstations for up to 2 operators/users.

Features:
  • Can easily be installed/mounted at the desired location, ideally beneath, work benches, trough two mounting holes.
  • A 6' long Coiled Cord with a #10 Ring Terminal provides an easy connecting point to the ground.
  • Also available with banana plug.
  • With its no built-in resistor construction, this product provides a direct path to the ground.
ITEM DESCRIPTION
CPGE-1047 2 Point Multi Point Ground Block w/ #10 ring terminal
multiple ground cords

Call Today to Order
1-877-463-9376

Two-Point Wrist Strap/Table Mat Common Point Grounding Cord

CPGE-1047-B Series is a heavy duty 15' long low-profile wrist strap/table mat Common Point Grounding (CPG) cord with two banana plug receptacles. This product can be snapped on the mat or can be mounted beneath the workbench. It has no resistor and provides a direct pass to the ground.

SPECIFICATIONS:
Core Insulation PVC plastic
Jacket Insulation 90 Shore A Polyurethane
Conductor 18 AWG tinned copper wire
Cable O.D. 3.0mm ± 0.1mm
Cable Length 15 ft
End Termination 2 X Banana Jacks-to-male banana plug
Installation  
    Mat Through a 3/8" (10mm) Female Stud
    Workbench Through 2 screws (Not Included).

ITEM DESCRIPTION
CPGE-1047B 2 Point Multi Point Ground Block w/ banana plug

arrow Common Point Cord
Multi Point Ground Block
Bench Mount Common Point
 arrow