Grounding ESD and Static Control Flooring - Carpet, Vinyl Tile, Epoxy Floors, Rubber Flooring
Poured ESD - Static Control Epoxy Floors
[Home]

ESD / Static Control Poured Epoxy Flooring: Waterborne Coatings

ESD / Static Control Poured Epoxy Flooring: Waterborne Coatings
ESD / Static Control Poured Epoxy Flooring: Waterborne Coatings

For applications requiring low VOC and low odor, Ground Zero offers waterborne, environment-friendly coatings. These durable coatings have physical properties comparable to solvent-based coatings, but without the volatile organic content. These moisture permeable coatings offer improved resistance to damage from moisture.

Waterborne coatings provide excellent topcoats in areas where reduced odor and moisture tolerance is essential. The waterborne coatings are permeable, allowing a limited amount of moisture to transmit through the coating. The moisture transmission reduces the effect of osmotic pressure.

  • Low VOC & Low Odor
  • Environmentally Friendly
  • Easy to Apply
  • Sprayable
  • Long Lasting & Very Durable
  • Moisture Permeability Offers Improved Resistance to Damage from Moisture

Corrosion Control Coatings

WB Primer Waterborne Primer
This primer is ideal for applications requiring a waterborne urethane or epoxy topcoat. It provides high bond strength, good flexibility, moisture resistance and chemical resistance.

WB 1000 Waterborne Epoxy
ZeroStat Crete WB 1000 is a two-component, high-gloss, waterborne epoxy resin coating. It is designed to provide excellent adhesion to and sealing of concrete, with good physical and chemical properties.



ZeroStat Crete UR 7000 Waterborne Urethane
ZeroStat Crete UR 7000 WB is a low-odor, waterborne, single component, aliphatic polyurethane. It has excellent chemical resistance, stain resistance (resists tire stains) and UV stability, as well as excellent sealing and adhesion properties. With its satin to semi-gloss finish, UR 7000 WB offers the benefits of a urethane without the solvent content.


Typical Physical Properties


 
WB Primer
WB 1000
WBUR 7000
Abrasion Resistance
ASTM D 4060 Taber Abraser.
1000 gm. load per wheel

CS-17 Wheels
120 mgs/
1000 cycles
CS-17 Wheels
120 mgs wt. loss/
1000 cycles
CS-17 Wheels
90-12050-65 mgs/
1000 cycles
Impact Resistance
ASTM D 2794
80 in.-lbs
(89.6 cm-kg)
direct & reverse
80 in.-lbs
(89.6 cm-kg)
direct & reverse
16120 in.-lbs
134 cm-kg)
direct & reverse
Flexibility
ASTM D 522
Conical Mandrel

1/8 in.
(.31 cm)
failure
1/8 in.
(.31 cm)
failure
1/8 in.
(.31 cm)
failure
Hardness
ASTM D 3363 Pencil

2B
2B
2H
Adhesion: Concrete
ASTM D 4541 Elcometer
350 psi
(2.4 MPa)
concrete failure
350 psi
(2.4 MPa)
concrete failure
350 psi
(2.4 MPA)
concrete failure
%Solids (By Volume)
As Supplied

30-35
37
52
Navigation
Technical Documents:
Free Samples
Free Estimate

arrow ZS Crete Corrosion
ZS Crete Premier
ZS Crete Premier- ESD
arrow