SB 1500 Series Static Shield Bag / Metal-out - Re Closable Zip Top

If you are required to use metal-out bags, the SB-1500 is a cost competitive equivalent to the metal-out bags you are purchasing now. The metal layer in SB-1500 bags is placed close to the surface for low resistance readings SB-1500 bags are tested to meet or exceed the requirements of MIL-B-81705C Type III, EIA 625, MIL-HDBK-263, MIL-STD-1686, and EOS/ESD standards.

FEATURES:

• Faraday cage effect of the metalized layer shields electronic devices from ESD and electrostatic fields
• Four layer construction offers excellent protection from punctures and tears
• Bags are printed with ESD warning symbol and date coded for QC traceability
• Testable to industry standards

ELECTRICAL PROPERTIES TYPICAL VALUES Surface Resistivity -Interior -Metal -Exterior Static Shielding Static Shielding Static Decay ESD S11.11/EIA 541 1011 ohms/square 102 ohms 105 ohms/square < 30 volts(MIL-B-81705C, EIA 541) < 10 nj ESD S11.31 <0.05 seconds (MIL-B-81705C, EIA 541) PHYSICAL PROPERTIES TYPICAL VALUES Tensile Strength Seam Strength Light Transmission Heat Sealing Conditions -Temperature -Time -Pressure Thickness Outgassing Non-corrosive > 20 lb. (ASTM D 882) (MIL-B-81705C) Pass 40% (Tobias)  250° F - 375° F 0.5 - 3.5 seconds 30 - 70 PSI 3.1 mils (SCC 008) Pass (ASTM E595) Pass(FTMS 101 MTH 3005)

SB-1500Z Static Shield Bag, Metal Out, Zip Top W"x L" W"x L" W"x L" 3 x 5 5 x 8 8 x 10 4 x 4 6 x 8 10 x 12 4 x 6 6 x 10 12 x 18