The MTR-1000 Megohmmeter measures Surface Resistivity using parallel electrodes and concentric rings. Tests Resistance To Ground (RTG), Resistance Between Two Points (RTT), Volume Resistance using two 5lb. 2.5” disc probes, and humidity and temperature during the resistivity-resistance testing. MTR-1000 tests each sleeve of a garment for continuity in addition to performing dissipative seating tests.

Conforms to ANSI/EOS/ESD (S4,S7.1,S12,S2.1), ASTM-F150, and NFPA 99A standards. The MTR-1000 Megohmmeter is designed to quality inspect incoming materials such as floor finishes, floor mats, table mats, conductive floor tiles, work surfaces, paints, bags, wrist straps, common point ground cords, footwear, packaging materials, clothing, and ESD chairs in static controlled areas.

Applications include engineering, maintenance, quality control, incoming inspection, manufacturing, and training.

MTR-1000 Features:

• Easy to read digital display
• Measures resistivity/resistance to 1⁰³-10¹²ohms
• Measures relative humidity-10% to 90% RH
• Measures temperature: 32°F to 100°F or 0°C to 37°C
• 10v/100v dual test voltage ranges
• Automatic zeroing and power off
• 120v or 220v AC and 9v DC alkaline or nickel cadmium
• Meets ANSI/EOS/ESD Standard 11.11
• CE Approved
• NIST certificate included

The MTR-1000 includes:

• Two 5lb. 2.5" probes with handles
• Two 3" parallel surface resistivity probes
• Dissipative chair test probe (meets ANSI/EOS/ ESD Standard 12.1)
• Earth ground probe
• Garment clamps (conforms to EOS/ESD 2.1 standard)
• Concentric ring probe available
• Foam lined carrying case

Technical Documents:
» MTR-1000 Data Sheet