Grounding Mechanisms - ESD ground cords, chair grounders, bonding clamps, harware
ESD/Static Control Ground Cords [Home]

ESD and Static Control Ground Cords- Ground Block
4 Point Multi Point Ground Block

4 Point Multi Point Ground Block

FEATURES:

  • Designed for use at workstations
  • Provides a common grounding point for one to four wrist straps, as well as table mats and runners
  • Mounts two #10 screws allowing unit to be securely installed to workbench
  • Four banana jacks provide four grounding points
  • Available without one meg ohm resistor
  • 15 ft. cord terminated with a banana jack.
ITEM DESCRIPTION
CPG-1046 4 Point Multi Point Ground Block

Technical Documents:
» Ground Cords Data Sheet
» Adapters for Snaps Data Sheet

Two-Point Bench Grounding Block

Two-Point Bench Grounding Block

The CPG-1051 is a space-saving grounding block designed to provide direct path to ground in ESD Benches & Workstations for up to 2 operators/users.

Features:
  • Can easily be installed/mounted at the desired location, ideally beneath, work benches, trough two mounting holes.
  • A 6' long Coiled Cord with a #10 Ring Terminal provides an easy connecting point to the ground.
  • Also available with banana plug.
  • With its no built-in resistor construction, this product provides a direct path to the ground.
ITEM DESCRIPTION
CPGE-1047 2 Point Multi Point Ground Block w/ #10 ring terminal

multiple ground cords

Call Today to Order
1-877-463-9376

Two-Point Wrist Strap/Table Mat Common Point Grounding Cord

CPGE-1047-B Series is a heavy duty 15' long low-profile wrist strap/table mat Common Point Grounding (CPG) cord with two banana plug receptacles. This product can be snapped on the mat or can be mounted beneath the workbench. It has a 1 meg resistor built-in.

SPECIFICATIONS:
Core Insulation PVC plastic
Jacket Insulation 90 Shore A Polyurethane
Conductor 18 AWG tinned copper wire
Cable O.D. 3.0mm ± 0.1mm
Cable Length 15 ft
End Termination 2 X Banana Jacks-to-male banana plug
Installation  
    Mat Through a 3/8" (10mm) Female Stud
    Workbench Through 2 screws (Not Included).

ITEM DESCRIPTION
CPGE-1047B 2 Point Multi Point Ground Block w/ banana plug

arrow Common Point Cord
Multi Point Ground Block
Bench Mount Common Point
arrow