Grounding Flooring
ESD and Static Control Wrist Straps [Home]
[Static Control Foot/Heel Grounders]
[ESD Shoes][ESD Boots][[ESD Wrist Straps]
ESD and Static Control Wrist Strap Monitor Systems

Item Number

GZ Constant Wrist Strap Monitor Systems

CM-9201 Size (h.w.d) .9" x 1.75" x 1.25"

CM-9202 Size (h.w.d) 1" x 2.4" x 2.3"

  • Safe Condition - <1.2 Meg Ohm, +/- 5%
  • Fault Condition - 7.2 Meg Ohm

CM-9203 Size (h.w.d) 1" x 4" x 2.4"

  • Safe Condition - 1-9 Meg Ohm
  • Fault Condition - <.5 Meg Ohm
  • Fault Condition - >6.5 Meg Ohm

All Units

  • Power - 115 VAC, 60 Hz Power Pack
  • Visual Alarm - Dual Color LED Indicators
  • Green = Safe - Red = Fault
  • Audio Alarm - Piezo Buzzer
  • Operation - Automatic. Unit is activated when operator plugs wrist strap connector into banana jack.
CM-9201 Single Channel Wrist Strap Monitor
CM-9202 Single Channel Wrist Strap Monitor with Ground Loop
CM-9203 Dual Channel Wrist Strap Monitor with Ground Loop

Item Number

Item Number

Technical Documents:
CM-9201 Constant Wrist Strap Monitors
CM-9202 Constant Wrist Strap Monitors
CM-9203 Constant Wrist Strap Monitors

A one-megohm resistor has been molded into the plastic cap on the ground cord fastener. DO NOT REMOVE. If it becomes damaged, replace ground cord immediately. Do not use in areas where the individual may come in contact with electrical circuits exceeding 250 volts.

The Ground Zero wrist strap is for static control. It will not reduce or increase your risk of receiving electrical shock when using or working on electrical equipment. Follow the same procedures you would use without wrist straps, including:
* Make certain that equipment having a grounding type plug is properly grounded.
* Make certain that you are not in contact with grounded objects other than through the strap.

arrow PWS-620 Metal Strap
Wrist Strap Monitor Systems