PHYSICAL PROPERTIES |
|
Surface Resistivity P.T.P. |
ASTM D257 |
<5.5 x 107 ohms |
Resistance to Ground |
EOS-ESD 7.01 |
<1.0 x 106 ohms |
Charge Decay Time |
FTMS 4046-101c |
<<<.17 seconds |
Flammability |
Radiant Panel ASTM E648 |
.73W/cm², Class I |
Residual Indentation |
LF-475A |
.002" average |
Abrasive Wear, Taber 1000 gm weight |
H-18 wheels, 5000 cycles |
1.1% loss of weight |
Abrasive Wear, Taber 1000 gm weight |
H-18 wheels, to wear layer penetration |
>20,000 cycles |
Static Coefficient of Friction |
ASTM D-2047-03 James Test |
.5 approx |
Static Load Limit |
DIN 16961.2 |
>700 p.s.i. |
Meets or exceeds minimum requirements of Federal Specifications for flexibility, dimensional stability, resistance to reagents and residual indentation |
LF-475a
SST-312b |
TECHNICAL DATA
Federal Specifications
Meets or exceeds performance characteristics of LF-475a and SS-T-312B for flexibility,
dimensional stability, resistance to reagents and residual indentation.
Surface Resistivity:
PTP (NFPA-99) ASTM D257 <5.5 x 107 ohms
Electrical Properties:
EOS-ESD 7.1 RTG <1 x 106 ohms
Flooring Radiant Panel:
ASTM E648; NBSIR 75-950; NFPA 253, Critical Radiant Flux: 0.73 W/cm2,
Class I
Smoke Density:
Passes ASTM E-662 / NFPA 258; Average optical density in burning / smoldering
mode: <450
Residual Indentation:
LF-475A: 0.002" average
Abrasive Wear, Taber H-18 wheel, 5,000 cycles, 1000
gm weight:
1.1% loss of weight
Abrasive Wear, Taber H-18 wheel, 1000
gm weight to wear layer penetration (end point):
> 20,000 cycles, (2.0% loss of weight)
Static Coefficient of Friction:
ASTM D-2047-03, James Test average wet, dry leather: .60 approx.
Static load limit DIN 16961.2:
>700lbs/in2>700 psi
Charge Decay Time:
FTMS 4046-101c < .17 seconds |
Navigation |
|
Technical Documents |
|
|
|
|
Contact GROUND ZERO for
full details, samples, specifications, warranty information,
installation and value added services. 1-877-GND-ZERO
(463-9376) |