Desktop Ionizers, Overhead Ionizers, Inline Ionizers, Air Gun IonizersDesktop Ionizers, Overhead Ionizers, Inline Ionizers, Air Gun Ionizers

Neutralization / Ionizers [Home]

Ionizing Air Gun

PtecT Stability

The ION-6430 ionizing air gun is outstanding in design and performance. Easy to hold and operate, the ION-6430 is simple to set up and use. Designed to protect most static sensitive devices, the ION-6430 uses a specialized piezoceramic technology that makes all the PtecT ionizers so reliable.

Maintenance Savings

PtecT ionizers save time and money because they require no calibration. Emitter life is increased and maintenance frequency is reduced, due to 68KHz AC ion emission.

PtecT Focused Air Ionization

A specialized piezoceramic high voltage transformer drives the technology making Ptec™ ionizers among the most reliable ionizers available. The model ION-6430 ionizing air gun produces a 68KHz AC output of approximately 2200V and a continuous stream of balanced air ions. Stable, small and lightweight, Ptec™ products detect and alarm if the high voltage output fails. Ionizers that use Ptec™ technology do not require calibration and only minimal maintenance.


  • Ptec™ Technology
  • High Frequency AC (68KHz) ion emission
  • A single ntegrated Air/ Power cable with strain relief at gun and controller
  • Up to 100 psi air input
  • Alarm indicator


  • Inherently stable output. Does not require calibration
  • Reduces emitter cleaning. Extends emitter life. Dense ion output
  • Easy to use. Power cables protected for long life. Never messy.
  • Strong blow-off foce, effective particle removal.
  • Red output alarm illuminates to alert high voltage failure
Power Input AC 100V~240V, 50/60Hz
Power Outlet un-fused, 0.5A or 1.0A max.
Ion Emission AC, 68KHz
Balance ±15 volts
Decay Time 1000V—100V, < 2 seconds @ 12”
Temperature 66-78°F (19-25°C)
Humidity 20-60% RH (non-condensing
Air Pressure 10—100 PSI, CDA or N2
Indicators Power: Green LED, Alarm: Red
Controls On/off switch
Mounting Mounting holes on controller
Emitter Points Tungsten Alloy
Hand Unit
8.5"H x 4"W x 1"D, (21.6 x 10.2 x 2.5 cm)
3.5"H x 6.25"W x 1.5"D, (8.9 x 15.8 x 3.8 cm)
Filter Option .01 micron filter (replaceable)*
*Note: Unit also may be operated without filter.
Hand Unit
12 oz. (.341 kg) with 7.5’ air hose
1 lb. (.45 kg)
Gas Input & Connection 20—100 psi, CDA or N2, 1/4” male industrial interchange quick disconnect or 1/4” quick release tube fitting
Warranty 1-year limited warranty
Certifications Pending Certifications

Call Today to Order 1-877-463-9376

Ion 8550
Item Number:

Technical Documents:

arrow Neutralization
Ion 8550
 Full Coverage Ionizer