Category Archives: ESD Protection

17 Mar

Should ESD shoes, heel grounders be worn outside?

Q: Is it ok to wear ESD shoes or heel, toe, or sole grounders outside?

A: No.  MIL-HDBK-263B Appendix 1 page 101 40.1.2 states, “Conductive shoes, shoe covers, or heel grounders should be used to discharge personnel on conductive floors. These items should only be worn in the ESD protected areas and should be kept clean so that contaminants do not inhibit their conductive interface with the floor.”

So, to protect your investment, for good house keeping and maintenance, longevity of the ESD personal equipment, just don them before going into the EPA and take them off when you leave.

Do this and keep them clean (vacuum inside of shoes weekly and maybe clean outsoles and grounders with soapy water once a week) and you’ll get more wear out of them and they’ll be more effective.

03 Mar

Paperwork in the Electrostatic Discharge Protected Area (EPA)

Q: In our organization, there is a lot of paperwork that accompanies the product. Is this harmful to the product due to static generation? I have measured all the documents surface resistivity and find it to be dissipative in nature. Our production environment humidity is controlled from 40%-60%. I also tried to tribocharge the paper but there is no static voltage generated. The funny thing is when I rub my plastic comb and put it near bits of small paper, the bits get attracted to the comb. So is paper really harmful to the semiconductor products that we manufacture for our customer?

ESD Dissipative / Cleanroom Paper

ESD Dissipative / Cleanroom Paper

A: Hello.  It’s good for you to observe the possible generators of static in an EPA (Electrostatic Discharge Protected Area) and to remove all non-essential insulators and to ground conductors or soft ground them, as the case may be, and to use neutralization on isolated conductors and essential insulators (ionization).  You may notice low static charge potential or voltage on that paper, but what happens when it tribocharges with other materials in the EPA? Read More →

26 Feb

Can ESD Wax be applied to bring back dissipative properties?

Q: Into our manufacturing area we have a dissipative floor installed, some areas has lost the dissipative properties, we are using ESD wax to correct those areas.

We are not having good results, we measure point to point and point to ground and these areas still measure insulative, my question is:
The ESD wax only works in floors with dissipative properties, or could it be applied on areas where the floor has lost the dissipation properties?”

A: Thanks for contacting us.  This is one of those questions that I like to pounce on, because it brings up many current misconceptions in the ESD flooring industry.  I’m going to answer your question about using chemicals to perhaps patch up certain areas in your flooring system, but I’m going to reach beyond that question and give a comparison of the ESD flooring system vs an otherwise non-ESD flooring system with an ESD sealer applied to it.  We supply both options here, by the way.  I hope you find what you need here and that this response helps guide you in your application.
Read More →

04 Feb

How to measure ohms of ESD Chair back rest

Q: Hi, I am a fresh ESD engineer. I need to perform a testing on ESD chair by using 5 pound Megohmmeter. I encountered a problem when I was trying to test on the backrest and rear of backrest. The backrest is a vertical plate, how to put a 5 pound electrode perpendicular to that surface? Even ANSI/ESD STM 12.1 2006 also not mentioned clearly about the testing on the backrest. Can I hold the 5 pound electrode by my hands so that it is contact with surface of the backrest? Or is there any other proper way?”

A: Hello,  I understand your frustration with some of these tests.

It sounds like you’ve got all the proper testing equipment and you’re following the best procedures for this.  The main concern is to see that the seat, seat back and arms are making good contact to the personnel, that personnel is wearing the proper clothing so as to enable the combination of personnel to chair to esd flooring system to electrical ground are enabling the tribocharge to recombine to earth.  If you have an ESD chair that includes a static conductive/dissipative seat, back, arms, casters, etc. we can make these resistance measurements to the chair’s groundable point, to a plate sitting underneath a caster, and ultimately, all the way across the floor to earth ground.
Read More →

26 Jan

What is the importance of using ESD Footwear on ESD Floor?

Q. What is the importance of having the personnel within an EPA to wear ESD footwear on an ESD Flooring system?

A. Thanks for the inquiry. It was good speaking with you earlier. You had stated that you had concerns about the grounding of your flooring system and my first question to you was about the use of ESD footwear. I believe that you had stated that not everyone was using esd footwear.

You pose a situation here that needs to be addressed as a top priority at all levels of ESD Awareness for every client that we come into contact with. I don’t mean to over-simplify this but I am seeing a common trend in the ESD industry; your ESD system is only as strong as the weakest link in the chain. Another way to say this is; If you buy a Plasma TV, it needs to come with a power cord and you need to plug that in. Read More →

05 Dec

People are a great generator of static electricity

Q: How does ESD Gloves, Aprons and Bunny Suit help for static discharge? WIll it not be mandatory to wear the wrist band, footwear and heel strap along with it?

A: People are a great generator of static electricity, among other things. The ESD gloves, aprons, etc. enable you to work and interface with sensitive components and equipment while protecting them from an ESD event as well as other things like contamination from human skin, street clothes, dirt, dust, etc. It will be mandatory for personnel ground to wear a wrist strap when in seated operations in a manufacturing environment or in the field. For personnel ground in an environment where you are standing or walking about, you do NOT have to wear a wrist strap if you have sufficient ESD footwear in conjunction with an ESD flooring system. The above requirements are per ANSI/ESD S20.20-1999 Table 1.

05 Dec

ESD Garments in addition to Wrist Straps and Footwear/Grounders

Q: Is it necessary to use the ESD garments? Is it not possible to ground the charges developed through a person’s clothing through the human body which is grounded through a wrist strap, footwear or heel strap while working at an EPA?

A: This depends who’s in charge.  If the ESD manager wants to require ESD personnel clothing and redundancy of ESD compliance for improved ESD control, they are the one to determine that.  More and more I’m seeing the use of ESD smocks outside of the cleanroom environment.  The company and their clients are reaping the benefits of increased quality control and reduced “out of box failures”.  Cloth is proven to be a better conductor of ESD charges than some types of clothing, but not everybody wears cotton.  Some people have dry skin and the ESD garments are a good idea for added protection and a requirement in some environments.

I’d like to add that when seated in an EPA, you must have your wrist strap on regardless of ESD Garments, ESD footwear, ESD flooring system, etc.  That’s a requirement of ANSI/ESD S20.20-2007 page 4 section 8.2 Personnel Grounding; “When personnel are seated at ESD protective workstations, they shall be connected to the grounding/equipotential bonding system via a wrist strap system.”

Further, per Table 2 note 2, “For situations where an ESD garment is used as part of the wrist strap grounding path, the total system resistance including the person, garment and grounding cord shall be less than 3.5E7 ohms.”

05 Dec

Using an ESD Chair when already protected

Q: Is it necessary to use an ESD Chair when the humany body is already grounded through a Wrist Strap, Footwear or Heel Strap when working in an EPA?

A: I think it’s a great idea.  I can be sitting at a workstation with an ESD flooring system, have a wrist strap on and when I get out of my chair, not generate more than 50 volts.  I may not generate more than 5 volts.  But what if I take my wrist strap off and jump out of my chair?  I can easily generate 100’s of volts.  Oh, by the way, jumping should not be allowed in an EPA.  If you have great ESD shoes or sole grounders and you keep at least one foot firmly planted on the ground at all times, then maybe your ESD chair is redundant, but still an added piece to the chain in your EPA system.

05 Dec

What does ASTM F2413-05 compliant mean?

Q: What does ASTM F2413-05 compliant mean?

A: I’ve got the document from the American Society for Testing and Material Standards (ASTM) in front of me now.

They sent me a copyrighted document on June 2nd of 2005.

It’s significance and use section is pretty encompassing;

  1. This specification contains requirements to evaluate the performance of footwear for the following:
    1. Impact resistance for the toe area of footwear.
    2. Compression resistance for the toe area of footwear.
    3. Metatarsal protection that reduces the chance of injury to the metatarsal bones at the top of the foot.
    4. Conductive properties which reduce hazards that may result from static electricity buildup, and reduce the possibility of ignition of explosives and volatile chemicals.
    5. Electric shock resistance.
    6. Static Dissipative (SD) properties to reduce hazards due to excessively low footwear resistance that may exist where SD footwear is required.
    7. Puncture resistance of footwear bottoms.
    8. Chain saw cut resistance, and
    9. Dielectric insulation.

There’s a section in there that describes Performance Requirements and Workmanship, Hazard Assessment, Labeling and Identification, Marking and Compliance Requirements, and Keywords.

05 Dec

Wrist straps according to EOS/ESD standards.

Q: We have an ESD tile floor in our testing lab. During a recent AS9100 audit we were asked why we don’t use wrist straps. Since our ISO9100 & 2 certified calibration provider only uses them when they have to certify the repair of a system and we don’t do that do we need more than the flooring? (booties, straps, etc.)

A: The answer to your question is, YES. In accordance to EOS/ESD standards, an ESD floor in conjunction with Heel Grounders, ESD Booties, ESD Foot Wear does NOT take the place of using Personnel grounded Wrist Straps at the workstation. So the basic ESD program would include the technician wearing a Wrist Strap.

Protective personnel grounding products such as; heel straps, booties and shoes working in conjunction with an ESD floor are designed for processes within your ESD program where the technician has to be mobile within an ESDPA, (ESD Protected Area) where the electrostatic sensitive device is not protected in an ESD protective container or shielded in some manner, e.g. ESD Bag, Bin, Tote, Box, Tray, Container, etc.

If your process has technical personnel setting or standing at a workstation they DO require grounding via a Wrist Strap. So one doesn’t necessarily take the place of the other, and both may be required depending on your personnel and their mobility throughout the plant.

If your technical staff removes their wrist strap to transport an ESD sensitive device or component outside the ESD protected area, the device also needs to be shielded as well as the technician being properly outfitted with ESD shoes, booties or heel straps. Within the ESDPA, they do require the additional shielding protection of the device, but it is always a good idea when practical.

I hope this helps address your question, please let us know if we can be of further assistance with any ESD questions or ESD protective product requirements you and your team may be sourcing.