Grounding ESD, Condcutive, Dissipative and ESD Table and Bench Matting and Mats
Static Control Table Matting [Home]
 [Static Control Table Matting] [Static Control Floor Matting] [Static Control Rubber Flooring]
[Anti-Fatigue Matting] [ESD Workstation Kits] [Chair Mats]


Item Number:
BM-UC (L x W) - Blue Top, Black Bottom or Gray
free samples

Also available in RoHS Pb-Free Green
BM-UC-"Width"-GN

3 Layer Vinyl ESD Matting
Ask about custom Logos!

Ultra Con BM

2-LAYER High Temperature Rubber ESD Matting
Ultimate static safe work surface for electronic assembly areas.
  • RoHS Compliant - lead free
  • Premium mechanical and electrical performance
  • Static-dissipative top layer
  • Fully conductive backing
  • Highly resistant to solder, fluxes and chemicals
  • Soft yet durable
  • Easily cleaned
  • Meets or exceeds: EIA 625, MIL-HDBK-263 and MIL-STD-1686
SIZES AVAILABLE
ROLLS 24" X 50'
  30" X 50'
  36" X 50'
  48" X 50'
Custom and Precuts available

ELECTRICAL PROPERTIES:
PTP: < 9.5 X 1007 @ 10 Volts per EOS / ESD 4.1
RTG: < 8.5 X 1006 @ 10 Volts per EOS / ESD 4.1

CHARGE DECAY:
Conditioning: 50% RH +/- 2% @ 230C +/- 10C for 24 Hours
Test conducted @: 50% RH +/- 2% @ 230C +/- 10C.
Test results =Time, seconds to decay to 10% of initial charge
Results: <0.05 seconds

PHYSICAL PROPERTIES:
Thickness: .060 (standard) .078, .090 (Optional)
Note: All custom and precut mats are cut within + or - .125".
Tensile, >1000 PSI
Durometer > 60 (Shore A)
Colors: Blue or Gray
Available in custom cut or roll form, 2-layer.
About Ground Zero's ESD and Static Control Table Matting
ESD mats for work bench tops and tables are a dependable method of controlling static, but don't get fooled. All mats DO NOT perform the same. Some fade with use, some just aren't conductive enough (or too conductive) to pass critical audits. ALL of our custom cuts and roll goods are checked prior to shipment to your facility. EACH & EVERY custom cut mat is tested to the latest standards and comes with a certification to help with your ISO needs. READY to go to work in your environment with professional looks, heavy duty grounding hardware and complete certified confidence.

At Ground Zero your needs count! We offer a full selection of ESD mat materials for use in bench top coverings and flooring runners. Available in both Bulk Form (rolls) or Custom Cut ESD matting that meets your size requirements. Our "custom cuts" can be shipped with or without grounding hardware or peel-and-stick adhesive (so your mats won't slide around) and can be configured with our static control constant monitors. But best of all no wasted material, hassles or cut fingers.

arrow Table Matting
Ultra Con TM
Ultra Con Elite
 arrow
We are the Largest ESD and Static Control Flooring Installer in the world!