Shielding Products   bar
Desiccants, Humidity Indicator Cards, Bag Sealers, ESD Trash Recepticles
Accessories [Home]

Static Dissipative Binders

Call Today to Order
1-877-463-9376

Static Dissipative Binders


GZ 3-ring binders are covered with static dissipative vinyl that is durable, static-safe and long-lasting. Heat sealed on all edges, the static-safe symbol is imprinted on the spine and cover.
  • Fits standard 8 1/2" x 11" paper.
  • Surface resistivity 1011 ohms/sq.
  • Available in 1/2", 1", 1 1/2", 2" and 3" ring sizes
  • Custom imprinting available
ITEM DESCRIPTION
SDB-1/2 Static Dissipative Binder 1/2"
SDB-1 Static Dissipative Binder 1"
SDB-1 1/2 Static Dissipative Binder 1-1/2"
SDB-2 Static Dissipative Binder 2"
SDB-3 Static Dissipative Binder 3"

ESD Dissipative / Cleanroom Paper

Item Number
SDP – 8.5 x 11 – C
SDP – 8.5 x 11 – W

Technical Documents:
» Static Dissipative Paper Data Sheet

Call Today to Order
1-877-463-9376

ESD Dissipative / Cleanroom Paper

  • Ground Zero ESD Paper Is a permanently static dissipative paper product.
  • Low sensitivity to changes in relative humidity, and almost free in component critical contaminants,(i.e. low amine, chloride and sodium)
  • The paper has a hard surface, is printable with no bleeding and virtually lint free.
  • Available in single sheets, continuous forms or machine roll, and can be supplied blank or pre-printed.
  • Ground Zero Static Dissipative Papers exhibit superior physical properties compared to regular paper.
  • High fold resistance
  • High burst strength
  • High tensile strength
  • High moisture and solvent resistance
  • Two thicknesses (calipers) offered: (0.0038” and 0.0070”)
SPECIFICATIONS
Typical Test Data - Target Values - Physical:
Thicknesses 0.0038” 0.0070”
Base weight (3000 sq. ft.) 20# 40#
Callper (milt) 3.7-4.0 6.5 – 7.5
Tear MD/CD 50/53 110/120
Tensile NO CD 32/22 55/25
Sheffield smoothness FS/WS 100/100 100/100
Brightness (%) 80 80
Opacity (%) 80 min 80 min
Resistivity (@ 50% RH) 5 x 107 5 x 107
Resistivity (@ 20% RH) 6 x 109 6 x 109
Typical Test Data - Chemical:
Ph (add level)
7.02 (neutral)
Chloride (Cl)
< 100 ppm
Nitrate (NO3)
< 10 ppm
Amine (NH2 - R)
<55 ppm
Sodium (Na)
<85 ppm
Sulfate (SO4)
<100 ppm
Standard Sizes:
8 ½ x 11" loose sheet
(0,0038" and 0,0070 " thick)
11x17" loose sheet
(0.0038” and 0.0070 " thick)
A4 metric loose sheet
(0.0038" and 0.0070 " thick)
9 ½x 11” continuous feed sheet
(0.0038” thick)
Rolls: (all roll paper is 0.0038" thick)
2 ½ wide 2 ¼ diameter on ½ " core
3 wide x 2 ¼ diameter on ½" core
3 wide x 2 ¼ diameter on 1" core
3 ½ wide 2 ¼ diameter on ½" core
4 11/16 wide x ¼ VA diameter on½" core

Sheet Protectors
Item Number:
DP-8.5x11

Sheet Protectors


Technical Documents:
» DP-8.5x11 Sheet Protector Data Sheet
» DP-8.5x11 Sheet Protector Sample

Sheet Protectors


Static dissipative sheet protectors can be used in many areas. Size is 8 3/4" x 11 1/4" + 5/8" side header with 3 binder holes. Thickness is 2 mil. Sheet protectors are embossed with "reaching hand" symbol and the words "static dissipative." GZ sheet protectors will reduce a static charge by 90% in less than 1 second and to 0 in less than 2 seconds, exceeding the current mil-spec. Custom embossing is available.

Size: 8 3/4” x 11 1/4” x 5/8”, side header to fit 3 ring binders
Thickness: 3 mil
Quantity: 100 pack

ELECTRICAL PROPERTIES:
Static Decay:
<.05 sec.
NFPA-56A
Static Decay:
<.013 sec.
MIL B 81705B
Surface Resistivity:
10e9 – 10e11
ASTM D-257 at 15% RH

SPECIFICATIONS:		    
Polycarbonate Compatibility
Yes
  
Corrosivity:
Negligible
FTMS 101C method 3005
Ion Content:
Below Detection limits
Sodium, Fluoride, Phosphate, Sulfide
Tensile Strength:
2400 psi
ASTM D-882
Elongation at Break
600%
ASTM D-882
Drawing Note 1:
Sheet protector comes with holes for US standard three ring binder. Yellow stripe, ESD symbol and wording: “ Static Dissipative”
 


arrow Sealer Accessories
Sheet Protectors
Cart Covers
arrow
We are the Largest ESD and Static Control Flooring Installer in the world!