The
Ion-6110A self-contained
compressed air ionizing cartridge controls static charge in production,
packaging, laboratory and other environments where static build-up
can cause contamination, ESD, material handling problems or microprocessor
lock-up. Compact and rugged, the cartridge can be used either
for in-line ionization or as an ionizing blowoff gun. For in-line
use, connect the Ion-6110A to compressed air source and it is ready
to ionize any type of production equipment. Or attach the cartridge
to an ordinary air gun and the airstream is ionized for effective
particle removal. An internal sensor initiates ionization only
when the gun is triggered, ensuring on demand control of static
charge.
FEATURES: • IsoStat® Technology
• Internal air flow sensor
• Shielded emitter points
• Compact size
• Optional blow-off gun kit • Audio
or visual notification of system failure not included with this
model
BENEFITS: • Intrinsically balanced; no calibration needed
• On-demand ionization during gun operation
• No shock hazard
• Adapts to compressed air lines
• Fits any air gun
Applications: In-line ionization. Reduces ESD
damage and microprocessor
lock-up in:
• IC packaging and marking
• Surface-mount equipment
• Device testing equipment
Ionizing blow-off gun. Removes particles
in:
• Printed circuit board assembly
• Medical device manufacturing
• Film processing
Item Number: ION-6110A
Patented IsoStat Technology The Ion-6110A's patented IsoStat technology guarantees intrinsically balanced ionization and eliminates complicated feedback circuits. Ionizers incorporating this technology never need calibration and require very little maintenance. IsoStat is based on a law of physics, Conservation of Charge, which states that charge cannot be created or destroyed in an isolated system. By isolating the ionizer’s emitter points from ground, IsoStat ensures equal numbers of positive and negative ions to better protect sensitive products.
High Reliability Patented IsoStat technology makes The Ion-6110A's blowers the most reliable ionizers available. IsoStat enables them to operate without grounding wires or cables and still maintain ionizer balance. The Ion-6110A's internal emitter points are electrostatically shielded to eliminate field-induced charging. Steady-state DC ion emission provides fast discharge with low airflow, for greater operator comfort.
Call Today to Order
1-877-463-9376
SPECIFICATIONS:
Input
24 VAC, less than 1 watt, from wall transformer
Power Source
Wall transformer: 120 VAC (powers up to 10
units), 230 VAC Ion-available
Power
Indicator Green LED
Ion Emission
Steady-state DC
Emitter Points
Permanent tungsten alloy, estimated life:5
years of continuous use
Ion Balance
Better than ±25 volts at 6 inches
Discharge Time
±1,000 volts to 100 volts
Air Flow
Requirements At least 2 scfm
Air Line Requirements
1/4" NPT female (input and output);
1/8" NPT adapter available
Internal Sensor
No sensor, for continuous flow applications
Dimensions
2.2"D x 3.1"L (5.6 x 7.9 cm) not
including fittings
Weight
6 oz. (170.1 g)
Warranty
2-year limited warranty
Certifications
Wall Transformer
Input
120 VAC, 50/60 Hz, 32 watts, alternate transformer
available for 230 VAC operation; powers up to four Ion-6110A
cartridges with an optional Y connector
Output
24 VAC, 1.0 amp
Cabling
8' (243.8 cm) cable with RJ-11 connectors; custom lengths
available
Dimensions
3.2"H x 2.5"W x 1.9" D (8.1
x 6.6 x 4.8 cm)
Weight
1 lb. (454 g)
Certifications
(120
VAC model) R
Testing
was performed at high speed with a charged plate monitor
in accordance with Ionization Standard
ANSI EOS/ESD S3.1- 1991 of the ESD Association.
to find out.
Have a Question? Get a Quote Now!!
