Grounding ESD Flooring
Static Control & ESD Vinyl Tile [Home]

Uni-Stat Conductive Solid

Vinyl Sheet ESD Flooring
ITEM
COLOR
DESCRIPTION
UNI-012 D/C GRAY UNI-STAT CONDUCTIVE/
DISSIPATIVE
UNI-123C BEIGE UNI-STAT CONDUCTIVE/
DISSIPATIVE
UNI-212C GRAY UNI-STAT CONDUCTIVE/
DISSIPATIVE
UNI-288C WHITE UNI-STAT CONDUCTIVE/
DISSIPATIVE
UNI-314D/C GRAY UNI-STAT CONDUCTIVE/
DISSIPATIVE
UNI-7312D GRAY UNI-STAT DISSIPATIVE
UNI-7810D WHITE UNI-STAT DISSIPATIVE
UNI-7812D GRAY UNI-STAT DISSIPATIVE
UNI-7851D GRAY UNI-STAT DISSIPATIVE

A premium pure solid flexible ESD sheet vinyl manufactured utilizing a calandering process, which incorporates a full conductive embossed bottom layer. Fully weldable for seamless installations and available in both ESD conductive and ESD static dissipative ranges.

TECHNICAL DATA:

Federal Specifications:

Exceeds performance characteristics of LF-475a and SS-T-312B for flexibility, dimensional stability, resistance to reagents and residual indentation

Surface Resistivity:

UNI-Conductive PTP (NFPA-99) ASTM D257 <5.5 x 107 ohms
UNI-Dissipative PTP (NFPA-99) ASTM D257 <5.5 x 108 ohms


Electrical Properties:

UNI-Conductive EOS-ESD 7.1 RTG <1.5 x 106 ohms
UNI-Dissipative EOS-ESD 7.1 RTG <1.5 x 107 ohms

Static load limit DIN 16961.2:

>700lbs/in2>700 psi

Charge Decay Time FTMS 4046-101c < .17 seconds

Size:

5’ x 82.5’ Rolls, .080 Thick

Navigation
Technical Documents:
free samples
free estimate

Which ESD flooring is best for you? Use the ESD Flooring Selection Chart to find out.
adobeAdobe Acrobat Required

COLORS:

esd vinyl tile
UNI-012 D/C

esd vinyl tile
UNI-123 D/C

esd vinyl tile
UNI-212 D/C

esd vinyl tile
UNI-288 D/C*
esd vinyl tile
UNI-314 D/C

UNI-7312-D
esd vinyl tile
UNI-7810 D
esd vinyl tile
UNI-7812 D
esd vinyl tile
UNI-7851 D
esd vinyl tile
UNI-7820-D

esd vinyl tile
UNI-7811-D

     

 



Physical Properties
Surface Resistivity P.T.P. ASTM D257 <8 x 108 ohms
Resistance to Ground EOS-ESD 7.01 <5.5 x 107 ohms
Charge Decay Time FTMS 4046-101c <<.17 seconds
Flammability Radiant Panel ASTM E648 .73W/cm², Class I
Smoke Density ASTM E-662, NFPA 258 <450 average smoking/smoldering
Residual Indentation LF-475A .002" average
Abrasive Wear, Taber 1000 gm weight H-18 wheels, 5000 cycles 1.1% loss of weight
Static Load Limit DIN 16961.2 >700 p.s.i.
Meets or exceeds minimum requirements of Federal Specifications for flexibility, dimensional stability, resistance to reagents and residual indentation LF-475a
SST-312b

arrow EuroStat - Overview
UniStat - Overview
UniStat - Recommendation
arrow