 |
In industries where electronic
components or volatile chemicals are involved, static
electricity can result in significant damage, injury
and financial loss. Even when people are equipped to
handle static-sensitive devices, inadvertent contact
can occur.
Ground Zero's ESD epoxy floor, wall and ceiling coatings and toppings can tie your
entire ESD system together. With the most comprehensive ESD epoxy line in the industry,
the Ground Zero can design a floor system to meet your specific needs. Not
only does Ground Zero have the most complete line, our products significantly
outperform the competition and are protected by multiple patents. Our ESD epoxy products
generate a maximum Body Voltage Generation of 15 volts, and have consistent readings regardless
of relative humidity.
- 5-Year Guarantee of Electrical Properties
- Excellent Chemical & Abrasion Resistance
- 8 Products & 4 Primers to Choose From
- Most Complete line in the Industry Protected by Multiple
Patents
- Unaffected by Relative Humidity
- < 15 Volts VBG
- Consistent Readings Throughout Entire Surface
|
ESD Primers
EPHB CR High-Build Primer for ESD Coatings
A high-build primer formulated specifically for applications involving static-sensitive
products or equipment. EPHB CR is easily applied and penetrates deep into the
concrete. The result is a primed surface that works in conjunction with Ground Zero's ESD-control coatings.
PR 300 Vinyl Tile Epoxy Primer
PR 300 is an ideal primer for ESD applications where a static-control coating
is being applied over vinyl tile. It is formulated with a special curing
agent that provides extra bond strength, assuring a secure bond to the tile.
PR 300 combines high strength and flexibility, enabling the primer to move
with the tile's natural flexing, so the tile won't loosen.
ESD PR1 Conductive Black Primer
If a conductive floor coating is required, ESD PR1 can be applied as a base
coat before using an ESD topcoat. This black, conductive, carbon-filled primer
is applied at 6 mils (2.5 x 10 4 - 10 6 range). It should not be
used with an ESD urethane topcoat
ESD PR3 Static-Dissipative
Black Primer
This primer was specifically formulated to be used with Ground Zero's Chemi-LDR
610 ESD Slurry Coating when a static dissipative floor is required. ESD PR3
allows Ground Zero to be flexible when designing a system to meet your needs.
It is a 100% solids epoxy system.
Thin-Film ESD Epoxy Coatings
ZeroStat Crete ESD EP 1000 Epoxy Coating
High-gloss, high-solids,
low-odor ESD coating. Typical installation requires one
coat.
ZeroStat Crete TM ESD EP 3000 Epoxy
Coating
High-gloss, solvent-borne, VOC-compliant coating with a slight orange peel
finish. Typical installation requires two coats.
Thick-Film ESD Epoxy Coatings
Chemi-LDR TM 610 ESD Self Leveler
Epoxy
This high-gloss,
low-odor, high-solids, 60-mil, ESD self-leveling coating
is designed to be applied to floors that are too rough
for a thin-film coating, but which have not deteriorated
to the point where a heavy-duty floor resurfacer is needed
to repair them. Typical installation is over a conductive
or static-dissipative primer.
ZeroStat Crete ESD EN 7000 Epoxy
Novalac
This high-solids, low-odor, epoxy Novalac with an orange peel finish offers
excellent chemical resistance against strong acids and caustics. Typical installation
requires one coat.
ZeroStat Crete ESD TM Coating
This transparent epoxy coating is designed to be used independently or in combination
with decorative flake or colored quartz aggregate to manufacture a monolithic
conductive or static dissipate (ESD) decorative floor system. This 100% solids,
no odor conductive epoxy resin polymer can provide ESD control to any existing
non-ESD surface; including concrete, tile, terrazzo and previously coated
floors. |
ESD
Coatings
Because ESD coatings differ in their
characteristics and benefits, several different types
of ESD products may be required for one facility. For
example, areas with heavy tow-motor traffic, light foot
traffic, clean room assembly/manufacturing, solvent/chemical
storage, and product handling might each require several
different ESD products. That's why Ground Zero offers
a full line of ESD-control coatings.
Problems such as odor, moisture in new
concrete, osmotic pressure, etc., also require an innovative
product line. No single polymer type or ESD product will
handle all of the conditions that can be experienced
in the field. Krypton Floor's dedication to research
and development in ESD control allows us to offer the
most extensive and cost-effective ESD product line on
the market today.
Ground Zero ESD-control coatings
offer the following benefits:
- Consistent resistance measurements
when tested at 10-500 volts.
- Eliminates hot and cold spots.
- <15 volts BVG (when utilizing
conductive footwear). (ZeroStat Crete 850ESD and Chemi-LDR
610 ESD <50; ZeroStat Crete ESD EN 7000 <20.)
- Dissipate a 5000-volt charge
to zero in <0.1 seconds (72 0 F @ 12% RH).
- Maintain electrical conductivity
throughout the entire thickness.
- Do not depend on relative humidity
(RH) for electrical properties.
- Electrical properties guaranteed
for five years.
Thin-Film Polyurethane Coatings
ZeroStat Crete UR 5000 ESD Polyurethane
This solvent-borne,
VOC-compliant, UV-stable alphatic polyester polyurethane
coating comes in a slight non-skid texture. Our urethanes
also offer higher chemical resistance and are UV-stable.
Typical installation requires one or two coats.
ZeroStat Crete UR 7000 WB
ESD Waterborne Urethane
This waterborne, low-odor aliphatic urethane offers easy sprayability for walls
or workstations. It also features fast cure cycles, low VOC and easy repairability.
Typical installation requires one or two coats.
ESD Resurfacer
ZeroStat Crete 950 ESD Epoxy Resurfacer
This low-odor,
high-solids epoxy resurfacer has electrical properties
throughout its entire thickness. Typical installation
is a 3/16" topping applied by raking and then power-troweling.
Used for badly damaged concrete or areas exposed to
high abuse. Only available in a conductive range.
|
to find out.
Have a Question? Get a Quote Now!!
